Telescopic slides GN 1420 are installed vertically and in pairs. The stroke reaches ≈ 100 % of the nominal length l1 (full extension).
The rubber stops of type "E" dampen the impact of the slide in the two end positions and takes on the locking function of the back stop position. This feature is noticeable through a slight resistance on opening and closing.
If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements.
The telescopic slides are delivered in pairs. They can be installed on the extension on either the left or right side due to the mechanics.
All mounting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present.

Material:
Type E: with rubber stop, locking device in back.
Steel, zinc plated, blue passivated ZB Bearings
Roller bearing steel
- Hardened ball cage
- Steel, zinc plated
Rubber stop
- Plastic / Elastomer
Operating temperature -20 °C to 100 °C