Elesa+Ganter GN 1490 Linear guide rail system.
Installed in pairs, with a horizontal alignment, either vertically (as shown) or perpendicularly. They are used where simple, linear movements must be executed, such as in automation or in vehicle or machine engineering. The guide rail can be installed on either the left or right side of the application. During installation of the cam roller carriages, the direction in which the load is received (marking notch) must be taken into account. The lubrication and maintenance instructions must be followed. The parts are delivered unassembled.
Types:
Type A3: with one cam roller carriage with 3 rollers
Type A5: with one cam roller carriage with 5 rollers
Type B3: with two cam roller carriages with 3 rollers
Type B5: with two cam roller carriages with 5 rollers
Identification no.
No. 0: without end stop
No. 1: with one end stop
No. 2: with two end stops
Material:
Guide rail
– Type ZB: Zinc plated steel, blue passivated
– Type NI: Stainless Steel 1.4016, blank
Cam roller carriage
– Base body in Stainless Steel AISI 304
– Roller with ball-bearing, 2RS, Stainless Steel 1.4125
– Roller bearing grease is FDA compliant, class H1 (permanent lubrication)
End stop in Stainless Steel AISI 304
Operating temperature -20 °C to 100 °C
