E+G Fixed Handles

E+G Handles and knobs
E+G Fixed Handles

E+G Fixed Handles

 


E+G GN 75.6 waist shaped knob
E+G GN 75.6 waist shaped knob
Elesa+Ganter GN 75.6 waist shaped knob in  Hygienic designType D: with female threadType E: with threaded studStainless Steel AISI 316 L (A4)- matt shot blasted MT- polished (Ra < 0.8 μm) PLSealing ring: hydrogenated acrylonitrile butadiene rubber (H-NBR), bluetemperature resistant -25 °C to +150 °CHardness 85±5 Shore AFDA compliantInformationGN 75.6 flat knobs are intended for use in hygiene areas. The sealed mounting surface enables mounting without dead spaces; the impervious geometry ....
E+G T-greb L.152
E+G T-greb L.152
Elesa+Ganter L.152 handlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases andother chemical agents.ColourBlack, glossy finish.Standard executionBlack-oxide steel hub, plain or threaded blind hole.
E+G Handle L.652
E+G Handle L.652
Elesa+Ganter L.652 handlesMaterialGlass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.ColourRAL 9005 black, RAL 2004 orange, RAL 3000 red, matte finish.Standard executionBrass boss, plain or threaded blind hole.
E+G Handle L.652 p
E+G Handle L.652 p
Elesa+Ganter L.652 p HandlesMaterialGlass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, matte finish.AssemblyZinc-plated steel threaded stud, chamfered flat end.
E+G T-handles GN 563.2
E+G T-handles GN 563.2
Elesa+Ganter GN 563.2 handlesMaterialAluminium.- Version BL: natural aluminium.- Version SW: RAL 9005 black colour, matte finish, epoxy resin coating.- Version SR: RAL 9006 silver, matte textured finish, epoxy resin coating.AssemblyPlain or tapped blind hole.
E+G Handle I.622
E+G Handle I.622
Elesa+Ganter I.622 HandlesMaterialHigh resilience polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.ColourSix standard colours: black, orange, grey, yellow, light-blue, red. Glossy finish.
E+G Handle I.622 N
E+G Handle I.622 N
Elesa+Ganter I.622 N HandlesMaterialHigh resilience polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.ColourRAL 9005 black or RAL 3000 red, glossy finish.
E+G Handle I.622 N-CLEAN
E+G Handle I.622 N-CLEAN
Elesa+Ganter I.622 N-CLEAN handlesMaterialHigh resilience polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.ColourWhite similar to RAL 9002, glossy finish.
E+G Handle I.222
E+G Handle I.222
Elesa+Ganter I.222 HandlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.AssemblyTapped blind hole.
E+G Handle I.222 N
E+G Handle I.222 N
Elesa+Ganter I.222 N HandlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.
E+G DIN 319 ball
E+G DIN 319 ball
Elesa+Ganter DIN 319 Ball knobsMaterial- Version KU: phenolic based (PF) black Duroplast, glossy finish.- Version KT: polyamide based (PA) black technopolymer, matte finish.Resistant to solvents, oils, greases and other chemical agents.- Version ST: polished steel.- Version AL: polished aluminium.- Version NI: AISI 303 stainless steel, shot-blasted matte finish.Assembly- Version L: hole with tolerance ring in spring steel.- Version M: with tapered hole.- Version K: H7 plain hole.- Version C: tap ....
E+G Handle P.111
E+G Handle P.111
Elesa+Ganter P.111 HandlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.AssemblyTapped blind hole.
E+G knob with lens SH.N
E+G knob with lens SH.N
Elesa+Ganter SH.N Ball knobs with magnifying lensMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish with equatorial groove.Magnifying lensTransparent polyamide based (PA-T) technopolymer. Resistant to solvents, oils, greases, petrol and other chemical agents(avoid contact with alcohol). Press-fit assembly. It improves the visibility of the labels.
E+G Knob IH.N
E+G Knob IH.N
Elesa+Ganter IH.N Knobs with magnifying lensMaterialHigh resilience polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, matte finish.Magnifiyng lensTransparent polyamide based (PA-T) technopolymer. Resistant to solvents, oils, greases, petrol and other chemical agents(avoid contact with alcohol). Press-fit assembly. It improves the visibility of the labels.
E+G Handle IEL.N-H
E+G Handle IEL.N-H
Elesa+Ganter IEL.N-H SOFT handlesMaterialHigh-resilience polypropylene based (PP) technopolymer, coated with "soft-touch" thermoplastic elastomer (TPE) chemicallybonded, hardness 70 Shore A.The coating material is certified in compliance with FDA (U.S. Food and Drug Administration).Resistant to solvents, oils, greases and other chemical agents.ColourBlack, matte finish.Magnifying lensTransparent polyamide based (PA-T) technopolymer. Resistant to solvents, oils, greases, petrol and other chemical ....
E+G Handle IEL.N
E+G Handle IEL.N
Elesa+Ganter IEL.N SOFT handlesMaterialHigh-resilience polypropylene based (PP) technopolymer, coated with "soft-touch" thermoplastic elastomer (TPE) chemicallybonded, hardness 70 Shore A.The coating material is certified in compliance with FDA (U.S. Food and Drug Administration).Resistant to solvents, oils, greases and other chemical agents.ColourBlack, matte finish.Magnifying lensTransparent polyamide based (PA-T) technopolymer. Resistant to solvents, oils, greases, petrol and other chemical a ....
E+G Handle EBK-SOFT
E+G Handle EBK-SOFT
Elesa+Ganter EBK SOFT Two-volume handlesMaterialHigh-resilience polypropylene based (PP) technopolymer, coated with "soft-touch" thermoplastic elastomer (TPE) chemicallybonded, hardness 70 Shore A.The coating material is certified in compliance with FDA (U.S. Food and Drug Administration).Resistant to solvents, oils, greases and other chemical agents.ColourBlack, matte finish.Magnifying lensTransparent polyamide based (PA-T) technopolymer. Resistant to solvents, oils, greases, petrol and other c ....
E+G Handle EBK-C SOFT
E+G Handle EBK-C SOFT
Elesa+Ganter EBK-C SOFT Two-volume handlesMaterialHigh-resilience polypropylene based (PP) technopolymer, coated with "soft-touch" thermoplastic elastomer (TPE) chemicallybonded, hardness 70 Shore A.The coating material is certified in compliance with FDA (U.S. Food and Drug Administration).Resistant to solvents, oils, greases and other chemical agents.ColourBlack, matte finish.Magnifying lensTransparent polyamide based (PA-T) technopolymer. Resistant to solvents, oils, greases, petrol and other ....
E+G Handle EBK.p-SOFT
E+G Handle EBK.p-SOFT
Elesa+Ganter EBK.p-SOFT Two-volume handlesMaterialHigh-resilience polypropylene based (PP) technopolymer, coated with "soft-touch" thermoplastic elastomer (TPE) chemicallybonded, hardness 70 Shore A.The coating material is certified in compliance with FDA (U.S. Food and Drug Administration).Resistant to solvents, oils, greases and other chemical agents.ColourBlack, matte finish.Magnifying lensTransparent polyamide based (PA-T) technopolymer. Resistant to solvents, oils, greases, petrol and other ....
E+G Label for knob MA
E+G Label for knob MA
Elesa+Ganter MA. Labels with marks and symbolsMaterialSelf-adhesive vinyl film, suitable for sticking to the inner surface of the magnifying lens of all the following handles: SH.N,IH.N, IEL.N-H.Standard labelsAccording to ISO 3287 regulations, printed on the adhesive side; 21 standard models.The visibility of the symbol is improved by the magnifying effect of the lens provided with the handle.
E+G Handle EBK-H SOFT
E+G Handle EBK-H SOFT
Elesa+Ganter EBK-H SOFT Handles with magifying lensMaterialHigh-resilience polypropylene based (PP) technopolymer, coated with "soft-touch" thermoplastic elastomer (TPE) chemicallybonded, hardness 70 Shore A.The coating material is certified in compliance with FDA (U.S. Food and Drug Administration).Resistant to solvents, oils, greases and other chemical agents.ColourBlack, matte finish.Magnifying lensTransparent polyamide based (PA-T) technopolymer. Resistant to solvents, oils, greases, petrol ....
E+G EKK-SST-VD Knurled knob
E+G EKK-SST-VD Knurled knob
E+G EKK-SST-VD Knurled grip knob in visually detectable technopolymer.Glass-fibre reinforced polyamide based (PA) technopolymer, RAL 5005 blue colour, matte finish.Produced from FDA compliant raw material (FDA CFR.21 and EU 10/2011).The RAL 5005 blue colour is easily visible in case of accidental food contamination.This makes it suitable for applications in the food and pharmaceutical industries.Also available in metal detectable version MD.
E+G EKK-SST-MD Knurled knob
E+G EKK-SST-MD Knurled knob
Elesa+Ganter EKK-SST-MD Knurled grip knob in metal detectable technopolymer.Glass-fibre reinforced polyamide based (PA) technopolymer, RAL 5001 blue colour, matte finish.Produced from FDA compliant raw material (FDA CFR.21 and EU 10/2011).The special technopolymer contains additives detectable by means of metal detectors.Built-in zinc alloy toothed insert for coupling to the metal clamping element.The RAL 5001 blue colour is easily visible in case of accidental food contamination. Furthermore th ....
E+G EKK-SST-SAN Knurled grip
E+G EKK-SST-SAN Knurled grip
Glass-fibre reinforced polyamide based (PA) with silver ion additive on an inorganic base, RAL 7021 grey-black colour (C1) or RAL 9016 white (C16), matte finish. The special antibacterial additive prevents bacteria on the product surface.The controlled release mechanism of the silver ions keeps the antibacterial characteristics unchanged over time, even after several washing cycles. Furthermore the material additives are metal detectable at a cubic particle size of 5mm per side.The high temperat ....
E+G Knurled knob EKK
E+G Knurled knob EKK
Elesa+Ganter EKK Knurled knobsMaterialGlass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.ColourAvailable in Ergostyle colours, matte finish.AssemblyBrass boss, tapped blind hole.
E+G Knurled knob EKK.p
E+G Knurled knob EKK.p
Elesa+Ganter EKK.p Knurled knobsMaterialGlass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.ColourGrey-black, matte finish.AssemblyZinc-plated steel threaded stud.
E+G GN 676.1 and GN 676.5 st. steel
E+G GN 676.1 and GN 676.5 st. steel
Elesa+Ganter GN 676.1/GN 676.5 Knobs GN 676.1: Black-oxide steel. Execution A: plain, rim. Execution B: knurled, rim. GN 676.5: AISI 303 stainless steel, sandblasted matte finish. Execution A: plain rim. Execution B: knurled rim.
E+G Handle P.131
E+G Handle P.131
Elesa+Ganter P.131 handlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.
E+G Handle P.131p
E+G Handle P.131p
Elesa+Ganter P.131p handlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.
E+G N 75 handle
E+G N 75 handle
Elesa+Ganter GN 75 Waist shaped knobsMaterialFine turned, blackened Steel.Accessories on requestZinc-plated steel.
GN 76 handles
GN 76 handles
Elesa+Ganter GN 76 handlesPlasticDuroplast (Phenolic PF)--temperature resistant up to 110 °C--black, shiny finishType DBush brassType EThreaded stud Steelzinc plated, blue passivated
E+G Handle P.390 N
E+G Handle P.390 N
Elesa+Ganter P.390 N HandlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.
E+G Handle I.307
E+G Handle I.307
Elesa+Ganter I.307 HandlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.AssemblyBrass boss, tapped blind hole.
E+G GN 419 knobs
E+G GN 419 knobs
Elesa+Ganter GN 419 Taper knobsPlasticDuroplast (Phenolic PF)--temperature resistant up to 110 °C--black, shiny finish
E+G Knurled handle I.168-SOFT
E+G Knurled handle I.168-SOFT
Elesa+Ganter I.168 SOFT knurled handleMaterialGlass-fibre reinforced polyamide based (PA) technopolymer coated with "soft-touch" thermoplastic elastomer (TPE), hardness90 Shore A. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, matte finish.AssemblyBrass boss, plain blind hole.Fitting to the shaft by means of a black-oxide steel socket set screw according to ISO 4029 (grub screws with hexagon socketand cup end).
E+G Handle I.150
E+G Handle I.150
Elesa+Ganter I.150 HandleMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.AssemblyTapped blind hole.
E+G Handle I.137
E+G Handle I.137
Elesa+Ganter I.137 HandleMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.AssemblyTapped blind hole.
E+G GN 201 handle
E+G GN 201 handle
Elesa+Ganter GN 201 handle
E+G Handle I.218
E+G Handle I.218
Elesa+Ganter I.218 Handles.MaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.AssemblyTapped blind hole.
E+G Handle I.142
E+G Handle I.142
Elesa+Ganter I.142 HandlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.AssemblyTapped blind hole.
E+G Handle I.195
E+G Handle I.195
Elesa+Ganter I.195 HandlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.AssemblyTapped blind hole.
E+G Handle I.147
E+G Handle I.147
Elesa+Ganter I.147 HandlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.AssemblyTapped blind hole.
E+G Handle I.149
E+G Handle I.149
Elesa+Ganter I.149 HandlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.AssenblyTapped blind hole.
E+G Handle I.580 N
E+G Handle I.580 N
Elesa+Ganter I.580 N HandlesMaterialHigh resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, grease and other chemical agents.ColourBlack, matte finish.
E+G Handle EGH-SOFT
E+G Handle EGH-SOFT
Elesa+Ganter EGH.SOFT HandleMaterial High resilience polypropylene based (PP) technopolymer, coated with"soft-touch" thermoplastic elastomer (TPE) chemically bonded, hardness 70 Shore A. Resistant to solvent, oils, greases and other chemical agents.ColourBlack, matte finish.
E+G Handle I.167 p
E+G Handle I.167 p
Elesa+Ganter I.167 p HandlesPhenolic based (PF) Duroplast body, polyamide flange. Resistant to solvents, oils, greases and other chmical agents.ColourBlack, glossy finish.Standard executionZinc-plated steel threaded stud, with chamfered flat end.
E+G Lever arm BL.366
E+G Lever arm BL.366
Elesa+Ganter BL.366 Lever armsHandle type I.280, phenolic based (PF) Duroplast, black colour, glossy finish, Resistant to solvent, oils, greases and other chemical agents.Fixed to the arm, not removable.
E+G Lever Arm BL.666
E+G Lever Arm BL.666
Elesa+Ganter BL.666 Lever armsStandard executionsHandle type I.280 phenolic based (PF) Duroplast. Glosse zinc-plated steel arm.
E+G Lever arm BL.368, BL.668
E+G Lever arm BL.368, BL.668
Elesa+Ganter BL.368 & BL.668 Lever armsBL.368Standard executionsBlack colour, fixed to the arm, not removable.Handle type I.222 phenolic based (PF) Duroplast. Matte chrome-plated steel arm.BL.668Standard executionsBlack colour, fixed to the arm, not removable.Handle type I.622 polyamide based (PA) technopolymer.Glossy zinc-plated steel arm.
E+G lever arem GN 310/GN 310 st. steel
E+G lever arem GN 310/GN 310 st. steel
Elesa+Ganter GN 310 & GN 310-NIGN 310ArmBlack-oxide steel.Fixed handleBlack Duroplast available in different shapes.- Version A: ball knob.- Version E: cylindrical knob.GN 310-NIArmAISI 303 stainless steel.Fixed handleBlack duroplast available in two different shapes:- Version A: ball knob.- Version E: cylindrical knob.
E+G GN 150 split hub
E+G GN 150 split hub
Elesa+Ganter GN 150 Split hubMaterial: Black-oxidised with vapor sintered steel.Cylinder head screw DIN 912: Blackened Steel.
E+G GN 150.5 split hub
E+G GN 150.5 split hub
Elesa+Ganter GN 150.5 Split hubMaterial: AISI 316L Stainless sintered steel.Cylinder head screw DIN 912 in AISI 304 Stainless Steel.
E+G GN 203 handel
E+G GN 203 handel
 
E+G Handle I.280
E+G Handle I.280
Elesa+Ganter I.280 HandlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.AssemblyTapped blind hole.
E+G Revolving handle I.281
E+G Revolving handle I.281
Elesa+Ganter I.281 Revolving handlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, grease and other chemical agents.ColourBlack, glossy finish.AssenblyPlain through hole.
E+G Handle I.280 p
E+G Handle I.280 p
Elesa+Ganter I.280 p HandlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.
E+G DIN 39 handles
E+G DIN 39 handles
Elesa+Ganter DIN 39 Fixed handlesMaterial- Version ST: zinc-plated steel, blue passivated.- Version KT: polyamide based (PA) technopolymer, temperature resistant up to 100 °C, black colour, matte finish, threaded bolt steel, blackened.Assembly- Type D: with plain shaft.- Type E: with threaded shaft.
E+G Revolving handle I.135
E+G Revolving handle I.135
Elesa+Ganter I.135 Revolvimg handlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.AssemblyPlan through hole with polyamide based (PA) technopolymer guide bosses in both ends.
E+G Revolving handle SI.134
E+G Revolving handle SI.134
Elesa+Ganter SI.134 Revolving handlesMaterialPhenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.ColourBlcak, glossy finish with equatorial groove.AssemblyPlain through hole with polyamide based (PA) technopolymer guide bosses in both ends.
E+G fold-away handle IR.620
E+G fold-away handle IR.620
Elesa+Ganter IR.620 Two-volume fold-away handlesMaterialPolyamide based (PS) technopolymer handle. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, matte finish.Standard executions-IR.620: Black-oxide steel stud. sintered and oxideised steel flat base for embedded mounting, black-oxide steel screw.-IR.620-SST: AISI 303 stainless steel stud, sintered AISI 303 stainless steel base for embedded mounting, AISI 303 stainless steel screw.
E+G handle IR.302
E+G handle IR.302
Elesa+Ganter IR.302 Fold-away handlesMaterialPhenolic based (PF) Duroplast handle. Resistant to solvents, oils, greases and other chemical agents.ColourBlack, glossy finish.Standard executions-IR.302: Black-oxide steel double guide stund, sintered and oxidised steel base with guide stund, black-oxide steel screw.-IR.302-SST: AISI 303 stainless steel double guide stund, sintered AISI 303 stainless steel base with guide stund, AISI 303 stainless steel screw.
E+G GN 598.3, GN 598.5 st. steel, GN 598.7
E+G GN 598.3, GN 598.5 st. steel, GN 598.7
Elesa+Ganter GN 598.3 / GN 598.5 and GN 598.7 Fold-away handlesMaterial GN 598.3/GN 598.7Black phenlic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Material GN 598.5Black phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Retractable mechanism GN 598.3/GN 598.7Black-oxide steel.Retractable mechanism GN 598.5AISI 303 stainless steel.
E+G handle IR.407
E+G handle IR.407
Elesa+Ganter IR.407 Fold-away handlesMaterialPhenolic based (PF) Duroplast handle. Resistant to solvents, oils, greases and other agents.ColourBlack, matte finish.Standard executionsIR.407: blaci-oxide steel double guide stund, sintered and oxidised steel flat base for embedded mounting, black-oxide steel screw.IR.407-SST: AISI 303 stainless steel double guide stund, sintered AISI 303 stainless steel flat base for embedded mounting, AISI 303 stainless steel screw.
E+G GN 798.3 and GN 798.5
E+G GN 798.3 and GN 798.5
Elesa+Ganter GN 798.3 / GN 798.5 Fold-away handlesGN 798.3HandlePolyamide-bases (PA) technopolymer.ColourBlack, matte finish.StundBlack-oxide steel.Flat baseBlack-oxide steelGN 798.5HandlePolyamide-based (PA) technopolymer.ColourBlack, matte finish.StundAISI 303 stainless steel.Flat baseAISI 303 stainless steel.
E+G Handle IRS.802
E+G Handle IRS.802
Elesa+Ganter IRS.802/IRS.802-SST Safety fold-away handlesMaterial (IRS.802)High resilience polypropylene based (PP) technopolymer handle. Resistant to solvents, oils, greases and other chemical agents.Material (IRS.802-SST)High resilience polypropylene based (PP) technopolymer handle. Resistant to solvents, oils, greases and other chemical agents.Colour (IRS.802)Black, matte finish.Colour (IRS.802-SST)Black, matte finish.Double guide stund (IRS.802)Black-oxide steel. Handle pivots freely during ....
E+G Fold-away handle IR.612
E+G Fold-away handle IR.612
Elesa+Ganter IR.612 Fold-away handlesMaterialHigh resilience polypropylene based (PP) technopolymer handle.Resistant to solvents, oils, greases and other chemical agents.ColourBlack, matte finish.Standard executions- IR.612: black-oxide steel double guide stud, sintered and oxidised steel flat base for embedded mounting, black-oxide steel screw.-IR.612-SST: AISI 303 stainless steel double guide stund, sintered AISI 303 stainless steel flat base for embedded mountin. AISI 303 stainless steel scre ....
E+G GN 798.2 handle
E+G GN 798.2 handle
Elesa+Ganter GN 798.2 HandlesHandlePolyamide-based (PA) technopolymer. Temperature resistant up to 90°C.ColourBlack, matte finish.SpindleZinc plated, blue passivated steel.Flat baseBlack-oxide steel.
E+G Handle P.390 N
E+G Handle P.390 N
Elesa-ganter P.390 handleMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Standard exeution: Plain blind hole.The elastic coupling, by press-fit assembly on h9 tolerance drawn stock bars, is not affected by vibrations and prevents the handle from slipping off.
E+G I.680 SOFT handle
E+G I.680 SOFT handle
Elesa-Ganter I.680 SOFT handleMaterial: High-resilience polypropylene based (PP) technopolymer, coated with "soft-touch" thermoplastic elastomer (TPE) chemically bonded, hardness 70 Shore A. Resistant to solvents, oils, greases and other chemical agents.The coating material is certified according to FDA (U.S. Food and Drug Administration).Colour: Black, matte finish.Standard execution: Threaded blind hole.
E+G I.780 handles
E+G I.780 handles
Elesa-Ganter I.780 handleMaterial: Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black (RAL 9005) or red (RAL 3000), matte finish.Assembly: Threaded blind hole.
E+G GN 798.7 fold-away handle
E+G GN 798.7 fold-away handle
Elesa-Ganter GN 798.7 Safety fold-away handleHandle: Polyamide-based (PA) technopolymer.Colour: Black, matte finish.Stud: Black-oxide steel.Flat base: Black-oxide steel.
E+G IRS.820 revolving handle
E+G IRS.820 revolving handle
Elesa-Ganter IRS.820 Tow volume safety fold-away handle.Material: Glass-fibre reinforced polyamide based (PA) technopolymer handle. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Standard versions:- IRS.820: black-oxide steel stud, glass-fibre reinforced technopolymer flat base for embedded mounting, black colour, blackoxide steel screw.- IRS.820-SST: AISI 303 stainless steel double guide stud, glass-fibre reinforced technopolymer flat base for embedde ....
E+G DIN 39-A4 Fixed handle
E+G DIN 39-A4 Fixed handle
Elesa-Ganter DIN 39-A4 Fixed handle in stainless steel.Material: AISI 316 stainless steet (A4)Assembly: pin with hexagon socket threaded end.
E+G GN 75.5 handle
E+G GN 75.5 handle
Elesa-Ganter GN 75.5 Waist shaped knobMaterial: AISI 304 matte shot-blasted, stainless steel.- Version MT: Stainless Steel.- Version PL: highly polished.Standard versions:- Type D: with female thread.- Type E: with threaded rod.Special executions on request:- zinc-plated Steel.- Stainless Steel (A4 quality).
E+G I.780+x Revolving handle
E+G I.780+x Revolving handle
Elesa+Ganter I.780+x Cylindrical revolving handle.Material:Glass-fiber reinforced polyamide based (PA) technopolymer, black color, matte finish.Standard executions:I.780 + x: zinc-plated steel pin, hexagon socket at threaded end.I.780 + x-SST: AISI 303 stainless steel pin, hexagonal socket at threaded end.
E+G IGF cylindrical handle
E+G IGF cylindrical handle
E+G IGF Cylindrical revolving handle with double protection, technopolymer, resistant to high temperaturesThe ergonomic profile and the wide flanges of the handle offer a comfortable and secure grip, protecting the hand laterally from direct contact with any high-temperature parts of the machine suchas oven handles, etc. The plain pass-through hole allows the handle to rotate and translate freely on the shaft.Material:Glass-fibre reinforced polyamide based (PA) technopolymer, resistant to high t ....
E+G GN 5063 T-handle
E+G GN 5063 T-handle
E+G GN 5063 T-handle in AISI 316 stainless steel.The handle is great for lifting, moving and operating parts or for clamping purposes by means of threads.The ergonomic shape allows for high operating forces.The T-handle can also be used in particularly aggressive environments thanks to the materials used.Material:- Stainless steel AISI 316Types:– Matte shot-blasted finish (MT)– Polished finish (PL)