E+G Plastic hinges

E+G Hinges
E+G Plastic hinges

E+G Plastic hinges

Hinges in plastic.


E+G Hinge CFA
E+G Hinge CFA
Elesa+Ganter CFA hinge Material: High-resilience polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Rotation pin AISI 303 stainless steel. Standard executions:- CFA-B: nickel-plated brass bosses with threaded hole. - CFA-p: nickel-plated steel threaded studs. - CFA-SH: pass-through holes for countersunk head screws. - CFA-CH: pass-through holes for cylindrical head screws. - CFA-B-p: nickel-plated brass bosses with th ....
E+G Hængsel CFAX
E+G Hængsel CFAX
Elesa+Ganter CFA hinge Material: High-resilience polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Rotation pin technopolymer (POM), black. Standard executions:- CFAX-B: nickel-plated brass bosses with threaded hole. - CFAX-SH: pass-through holes for countersunk head screws. - CFA-CH: pass-through holes for cylindrical head screws. Rotation angle Max 215° (-35° and + 180° being 0° the condition where the two inte ....
E+G Hinge CFA-ERS
E+G Hinge CFA-ERS
Elesa+Ganter CFA-ERS hinge with friction brake Hinge body: High resilience polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin: Black-oxide steel. Assembly: Through holes for countersunk head screws. Adjustable handle in glass-fibre reinforced polyamide based (PA) technopolymer with red writing "PUSH" tampoprinted on the lever body (avoid contact with solvents, alcohol or detergents containing alcohol). Bla ....
E+G Hinge CFA-F
E+G Hinge CFA-F
Elesa+Ganter CFA-F hinge with detent position at 90° Material: High-resilience polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin: AISI 303 stainless steel. Standard executions:- CFA-F-B: nickel-plated brass bushings, tapped hole. - CFA-F-SH: through holes for countersunk head screws. CFA-F hinges are recommended when the opening of the door must not exceed the limit of 90°. Once the hinge is fitted onto ....
E+G Hinge CFA-SL
E+G Hinge CFA-SL
Elesa+Ganter CFA-SL hinge with slotted holes Material: High resilience polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin: AISI 303 stainless steel. Assembly through slotted holes for cylindrical head screws which allow the adjustment during assembly. - Execution H: for horizontal adjustments. - Execution V: for vertical adjustments. - Execution H-V: for both horizontal and vertical adjustments. Rotation ....
E+G Hinge CFB
E+G Hinge CFB
Elesa+Ganter CFB hinge Material: High resilience polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin: AISI 303 stainless steel. Assembly through holes for M6 countersunk head screws and referring pins for an accurate positioning of the hinge body
E+G Hinge CFC
E+G Hinge CFC
Elesa+Ganter Thin hinge CFC Material: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin and end-caps: Acetal resin based (POM) technopolymer. Assembly through holes for self-tapping countersunk head screws diameter 4.8 mm. Completely made of technopolymer, without using metal parts, the hinge is suitable for application on machines and equipment in those sectors where laws or parti ....
E+G Hinge CFD
E+G Hinge CFD
Elesa+Ganter CFD hinge Material: High resilience polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin AISI 303 stainless steel. Versions: - Execution B: nickel-plated brass bushings, tapped hole. - Execution p: nickel-plated steel threaded studs. - Combined executions: p/B - B/p - CH/B - CH/p (CH = through holes for cylindrical head screws). The hinge is made up of two bodies with different dimensions (a na ....
E+G Hinge CFE
E+G Hinge CFE
Elesa+Ganter CFE hinge Material: High resilience polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin: AISI 303 stainless steel. Assembly: - Execution B: nickel-plated brass bushings, tapped hole. - Execution p: nickel-plated brass threaded studs. - Execution CH: through holes for cylindrical head screws. - Combined executions: B/p - B/CH - p/CH
E+G Hinge CFF
E+G Hinge CFF
Elesa+Ganter CFF hinge Material: High resilience polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin: AISI 303 stainless steel. Assembly: - Execution B: nickel-plated brass bushings, tapped hole. - Execution p: nickel-plated steel threaded studs. - Combined executions: B/p
E+G Hinge CFG
E+G Hinge CFG
Elesa+Ganter CFG Hinge for profiles. Max. opening angle of 270 degrees. Made from glass fibre reinforced polyamide based (PA) technopolymer. Installation instructions can be found under documents
E+G HingeCFH
E+G HingeCFH
Elesa+Ganter CFH hinge Material: High resilience polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin: AISI 303 stainless steel. Assembly through holes for cylindrical head screws. Rotation angle Max 270°, between 0° and -90° and between 0° and 180° (0° = condition where the two interconnected surfaces are on the same plane). Do not exceed the rotation angle limit.
E+G Hinge CFI
E+G Hinge CFI
Elesa+Ganter Three-piece hinge CFI for profiles. Made of glass fiber reinforced polyamide based (PA) technopolymer. Max. opening angle of 270 degrees. Installation instructions under Documents.
E+G Hinge CFJ
E+G Hinge CFJ
Elesa+Ganter CFJ hinge Material: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin: AISI 303 stainless steel, totally moulded in the hinge body. Assembly: - Execution B: nickel-plated brass bushings, tapped hole. - Execution p: nickel-plated steel threaded studs. - Execution EH: through holes for hexagonal head screws. - Combined executions: B/SH (SH = through holes for countersunk ....
E+G Hinge CFL.
E+G Hinge CFL.
Elesa+Ganter CFL. HingeMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Rotation pin: AISI 303 stainless steel.Colour: Black, matte finish.Standard execution: Pass-through holes for cylindrical head screws.Rotation angle (approximate value): Max 200° (-20° and + 180° being 0° the condition where the two interconnected surfaces are on the same plane). Do not exceed the rotation angle limit so as not to prejudi ....
E+G Hinge CFM
E+G Hinge CFM
Elesa+Ganter CFM hinge Material: Glass-fibre reinforced polyamide based (PA) SUPER-technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: black, matte finish. Rotation pin: AISI 303 stainless steel. Standard executions: - CFM-p: nickel-plated steel threaded studs. - CFM-SH: pass-through holes for countersunk head screws. - CFM-CH: pass-through holes for cylindrical head screws with washer.- CFM-p-SH: nickel-plated steel threaded studs and pass-through holes for c ....
E+G CFMW. Hinge
E+G CFMW. Hinge
Elesa+Ganter CFMW. HingeMaterial: Glass-fibre reinforced polyamide based (PA) SUPER-technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin: Glass-fibre reinforced polyamide based (PA) technopolymer, black colour.Assembly kit - n°4 technopolymer covers. - n°4 technopolymer bushings.
E+G CFMY hinge
E+G CFMY hinge
Elesa+Ganter CFMY Hinges for removeble doors Material: Glass-fibre reinforced polyamide based (PA) SUPER-technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin: Self-lubricating glass-fibre reinforced polyamide based (PA) technopolymer, black colour. Standard executions with pass-through holes for countersunk head screws. - CFMY-D: rotation pin fitted on the right hinge body. - CFMY-S: rotation pin fitted on the left hinge body.
E+G Lift-off hinge CFN
E+G Lift-off hinge CFN
Elesa+Ganter In line lift-off hinge CFN Material: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin: Acetal resin based (POM) technopolymer, black colour. Assembly: - Execution B: nickel-plated brass bushings, tapped hole. - Execution p: nickel-plated steel threaded studs. - Combined executions: B/p - p/B
E+G Lift-off hinge CFO
E+G Lift-off hinge CFO
Elesa+Ganter CFO Offset lift-off hinge Material: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin: Acetal resin based (POM) technopolymer, black colour. Assembly through holes for hexagonal head screws, cylindrical head screws with hexagon socket or M5 normal nuts (UNI 5588). Screw-covers: Polyester based (PBT) technopolymer, black colour, glossy finish, snap-in assembly. Covers fo ....
E+G Hinge CFP
E+G Hinge CFP
Elesa+Ganter CFP Hinges Material: Acetal resin based (POM) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. - Execution SH: through holes for countersunk head screws. - Execution CH: through holes for cylindrical head screws. - Execution EH: through holes for hexagonal head screws. Screw-covers: Polyester based (PBT) technopolymer, black colour, matte finish, snap-in assembly. Rotation angle max 195°, between 0° and -15° and between 0 ....
E+G Hinge CFQ
E+G Hinge CFQ
Elesa+Ganter CFQ Hinge:Material: Acetal resin based (POM) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish. - Execution SH: through holes for countersunk head screws.- Execution CH: through holes for cylindrical head screws. - Execution EH: through holes for hexagonal head screws. Screw-covers: Polyester based (PBT) technopolymer, black colour, matte finish, snap-in assembly. Rotation angle max 195°, between 0° and -15° and between 0° ....
E+G Hinge CFR
E+G Hinge CFR
Elesa+Ganter adjustable hinge CFR Material: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Adjusting inserts: Technopolymer, black colour. Rotation pin AISI 303 stainless steel. The adjusting inserts (ELESA patent) are designed to compensate limited misalignments of doors. Vertical and horizontal adjustments are both possible by simply setting the orientation of the inserts. Rotation angle Ma ....
E+G Hinge CFT
E+G Hinge CFT
Elesa+Ganter CFT Hinges with screw-covers Material: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin Acetal based (POM) technopolymer, black colour. Screw-covers: Polyester based (PBT) technopolymer, black colour, glossy finish, snap-in assembly. Standard executions: - CFT-SH: pass-through holes for countersunk head screws. - CFT-EH: hexagonal pass-through holes for cylindrical hea ....
E+G Hinge CFU
E+G Hinge CFU
Elesa+Ganter CFU hinges with adjustable friction Material: Acetal-resin based technopolymer (POM). Resistant to oils, greases and other chemical agents. Flammability class UL94-HB. Pin: Polycarbonate based (PC) technopolymer, black colour (white for CLEAN execution). Flammability class UL94-V2. Adjusting boss and screw AISI 304 stainless steel screw. AISI 303 stainless steel adjusting boss. Assembly by means of pass-through holes for cylindrical head screws.Black colour, matte finish.
E+G CFV. Hinge
E+G CFV. Hinge
Elesa+Ganter CFV. Detent position hingeMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Rotation pin: AISI 303 stainless steel.Standard executions -CFV-SH: pass-through holes for countersunk head screws. -CFV-EH: pass-through holes for hexagonal head screws.Rotation angle: Max 210° (-90° and +120° being 0° the condition where the interconnected surfaces are on the same plane).
E+G Hinges CFMR
E+G Hinges CFMR
Elesa+Ganter CFMR Spring hingesMaterial: Glass-fibre reinforced polyamide (PA) SUPER-technopolymer body, black colour, matte finish.Rotating pin: Aluminium.Return spring: Stainless steel.NO: Normal openNC: Normal closed
E+G Hinge CFM-VD
E+G Hinge CFM-VD
Elesa+Ganter CFM-VD hinge in visually detectable technopolymer.Glass-fibre reinforced polyamide based (PA) technopolymer, RAL 5005 blue colour, matte finish.Produced from FDA compliant raw material (FDA CFR.21 and EU 10/2011).The RAL 5005 blue colour is easily visible in case of accidental food contamination.This makes the handle suitable for applications in the food and pharmaceutical industries.Also available in metal detectable version MD.
E+G Hinge CFM-MD
E+G Hinge CFM-MD
E+G CFM-MD hinge in metal detectable technopolymer.Glass-fibre reinforced polyamide based (PA) technopolymer, RAL 5001 blue colour, matte finish.Produced from FDA compliant raw material (FDA CFR.21 and EU 10/2011).The special technopolymer contains additives detectable by means of metal detectors.Built-in zinc alloy toothed insert for coupling to the metal clamping element.The RAL 5001 blue colour is easily visible in case of accidental food contamination. Furthermore the material additives are ....
E+G Hinge CFM-TR
E+G Hinge CFM-TR
Elesa+Ganter CFM-TR hinge in SUPER-technopolymer.Material:Glass-fibre reinforced polyamide based (PA) SUPER-technopolymer, black colour, matte finish.Rotating pin in AISI 303 stainless steel.Standard executions:Pass-through holes for countersunk head screws.CFM-TR-A: hinge body frame side identical to the hinge body door side.CFM-TR-B: hinge body frame side different to the hinge body door side.Rotation angle (approximate value):Max 270° (-90° and +180° being 0° the condition where the two i ....
E+G Hinge CFM-TR-G
E+G Hinge CFM-TR-G
Elesa+Ganter CFM-TR-G hinge for mounting on glass or panels.Material:Body in glass-fibre reinforced polyamide based (PA) SUPER-technopolymer, black colour, matte finish.Flat washer in A4 UNI 6593-MT stainless steel.Step washer in NBR rubber, hardness 70 Shore A. Produced from FDA compliant raw material (FDA CFR.21 and EU 10/2011).Rotating pin in AISI 303 stainless steel.Standard execution:Frame side: pass-through holes for countersunk head screws.Panel side: pass-through hole for round head squa ....
E+G Hinge CFG-ERS
E+G Hinge CFG-ERS
Elesa+Ganter CFG-ERS hinges for profiles with friction locking.Material:Glass-fibre reinforced polyamide based (PA) technopolymer, black or grey colour RAL 7040 (C33), matte finish.Rotating pin in zinc-plated steel.Pass-through holes for M6 countersunk head screws.Technopolymer centering inserts for profiles with slot dimensions from 6 to 12 mm.Zinc-plated washer, positioned between the adjustable handle and the hinge body.Adjustable handle for clamping:Glass-fibre reinforced polyamide based (PA ....
E+G Hinge CFMX
E+G Hinge CFMX
Elesa+Ganter CFMX hinge in super technopolymer.Material:- Body in glass-fibre reinforced polyamide based (PA) SUPER-technopolymer, black colour, matte finish.- Rotating pin in glass-fibre reinforced polyamide based (PA) SUPER-tecnopolymer.Standard executions:- CFMX-SH: pass-through holes for countersunk head screws.- CFMX-CH: pass-through holes for cylindrical head screws with washer type UNI 6592 / ISO 7089.Rotation angle (approximate value)Max 270° (-90° and +180° being 0° the condition wh ....
E+G Hinge CFVT
E+G Hinge CFVT
Elesa+Ganter CFVT hinge in technopolymer.Material:- Glass-fibre reinforced polyamide based (PA) technopolymer body, black colour, matte finish, UV resistant.- Springs in stainless steel.Assembly by means of pass-through holes for M5 cylindrical head screws.Without screw-covers.Standard executions:- CFVT-CH: without detent (free rotation).- CFVT-CH-80: detent with angle -70° /-7° / 80°, resistant torque 0.7 Nm or 1.2 Nm or 1.7 Nm.- CFVT-CH-115: detent with angle -70° /-7° / 115°, resistant ....
E+G Hinge CFGY
E+G Hinge CFGY
Elesa+Ganter CFGY can be used with profiles of 40 mm, with slot dimensions from 8 to 10 mm.Material:Glass-fibre reinforced polyamide based (PA) technopolymer, black or grey colour RAL 7040 (C33), matte finish.Standard execution:Pass-through holes for M6 countersunk head screws.CFGY-D: rotation pin fitted on the right hinge body.CFGY-S: rotation pin fitted on the left hinge body.Max 270° (-90° and +180° being 0° the condition where the two interconnected surfaces are on the same plane).Do not ....
E+G Hinge CFTX-PP
E+G Hinge CFTX-PP
Elesa+Ganter CFTX-PP hinge in technopolymer.Polypropylene hinges are particularly suitable for those sectors where they can be in contact with chemical agents and/or for frequent washing with acidic or basic detergent solutions, such as in the chemical, process, pharmaceutical, food, textile and paper industry.Material:- Body inglass-fibre reinforced polypropylene based (PP) technopolymer, black colour, matte finish- Rotating pin in AISI 303 stainless steel.Standard execution:Pass-through holes ....
E+G Hinge CFTX-pp-TT
E+G Hinge CFTX-pp-TT
Elesa+Ganter CFTX-PP hinge in technopolymer.Polypropylene hinges are particularly suitable for those sectors where they can be in contact with chemical agents and/or for frequent washing with acidic or basic detergent solutions, such as in the chemical, process, pharmaceutical, food, textile and paper industry.Material:– Body inglass-fibre reinforced polypropylene based (PP) technopolymer, black colour, matte finish– Rotating pin in AISI 303 stainless steel.Standard execution:With titanium g ....
E+G Hinge CFDA
E+G Hinge CFDA
Elesa+Ganter hinge CFDA for narrow jamb.The hinge is made up of two bodies of different sizes (one wide and one narrow) for use, for example, on structures with a narrow jamb.Rotation angle (approximate value):Max 215° (-5° and +210° being 0° the condition where the two interconnected surfaces are on the same plane). Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.Material:Glass-fibre reinforced polyamide based (PA) SUPER-technopolymer, black co ....
E+G PMC Spacer plate
E+G PMC Spacer plate
Elesa+Ganter PMC spacer plate.The PMC plates allow different hinges to be fitted on the same door/jamb.For example, it is possible to use a CFVT detent hinge with a CFSW hinge with built-in safety switch to create a door that remains open in certain positions and has a safety function in case of accidental opening (see Fig. 1).Material:Die cast zinc alloy, epoxy resin coating, black colour, matte finish.