E+G Indexing plungers no rest

E+G Indexing plungers
E+G Indexing plungers no rest

E+G Indexing plungers no rest

Elesa+Ganter indexing plungers. Steel, stainless steel or plastics.


E+G GN 607.2 indexing plunger
E+G GN 607.2 indexing plunger
Elesa+Ganter GN 607.2 and GN 607.3 indexing plungers for thin metal sheets.For material caracteristics please see datasheet under Documents. 
E+G GN 613 indexing plunger
E+G GN 613 indexing plunger
Elesa+Ganter GN 613 indexing plungers are used where positioning operations are required.Plunger: Black-oxide steel with hardened end. Suggested matching hole in H7 tolerance.Locking nut: Black-oxide steel."Push/Pull" knurled knob: High resilience polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and otherchemical agents.Version A: with knob, without locking nut.Version G: without knob, without locking nut.
E+G GN 617.1-NI indexing plunger
E+G GN 617.1-NI indexing plunger
Elesa+Ganter GN 617.1-NI Indexing plunger with rest position. Partly made from stainless steel. 
E+G GN 617-NI indexing plunger
E+G GN 617-NI indexing plunger
Elesa+Ganter GN 617 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
E+G GN 617 indexing plunger
E+G GN 617 indexing plunger
Elesa+Ganter GN 617 indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.Steel parts: blackened, plunger hardenedKnob: Plastic (Polyamide PA), black matt finish, not removable.
E+G GN 817.2 B indexing plunger
E+G GN 817.2 B indexing plunger
Elesa+Ganter Indexing plungers GN 817.2 B correspond to GN 817, they only differ by a longer knob.Used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.For materiale speicfications please see datasheet that can be found under Documents.
E+G GN 817.2 indexing plunger
E+G GN 817.2 indexing plunger
 
E+G PMT.100 Indexing plunger
E+G PMT.100 Indexing plunger
Elesa+Ganter PMT.100 SUPER-technopolymer indexing plungerThreaded body: Special glass-fibre reinforced polyamyde based (PA) SUPER-technopolymer, black colour. Resistant to solvents, oils, greases and other chemical agents.Plunger: Black-oxide hardened steel or AISI 303 stainless steel.Suggested tolerance for matching hole = H7.Knob: High-resilience polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other chemical agents.Spring: AISI 302 stain ....
E+G PMT.110 indexing plunger
E+G PMT.110 indexing plunger
Elesa+Ganter PMT.110 SUPER-technopolymer indexing plungersLightness and high mechanical resistance of the product.Anticorrosive material: suitable even in the presence of liquid or humidity (PMT.110-SST).The SUPER-technopolymer threaded body of the plunger offers a low friction factor to the plunger stroke; no lubricating maintenance is required.Resistant to several washing cycles with solvents and detergents, for this reason they are suitable for applications as in the pharmaceutical or food in ....
E+G GN 613-NI indexing plunger
E+G GN 613-NI indexing plunger
Elesa+Ganter GN 613 indexing plungers are used where positioning operations are required.For materials: See datasheet under Documents.
E+G GN 618 indexing plunger
E+G GN 618 indexing plunger
Elesa+Ganter GN 618 indexing plungers are especially designed for assembly by means of welding.Plain body: Black-oxide steel, welding quality.Plunger: Black-oxide steel with hardened end. Suggested matching hole in G7 tolerance."Push/Pull" knurled knob (execution A): High resilience polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and otherchemical agents.Threaded drive rod (excecution G): For combination with a knob on customer's request or to ....
E+G GN 607 indexing plunger
E+G GN 607 indexing plunger
Elesa+Ganter GN 607 indexing plungerCompact dimensions and are used on thin metal sheets.For materials, please see data sheet under Documents.Accessories on request (For sufficient quantities): GN 609 black-oxide steel distance bushings are available for making up for the length of threading in case the plunger is assembled on thin sheets.
E+G GN 608 indexing plunger
E+G GN 608 indexing plunger
Elesa+Ganter GN 608 indexing plungers have compact dimensions and are used on thin metal sheets.Body with flange: Zinc-plated die-cast zinc alloy with two holes for assembly with countersunk head screws.Plunger: Black-oxide steel with hardened end. Suggested matching hole in H7 tolerance."Push/Pull" knurled knob: High resilience polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other chemical agents.
E+G GN 608.5 indexing plunger
E+G GN 608.5 indexing plunger
Elesa+Ganter GN 608.5 indexing plunger with flangeCompact dimensions and are used on thin metal sheets.Body with flange: Zinc-plated die-cast zinc-alloy with two holes for assembly with countersunk head screws.Plunger: AISI 303 stainless steel, chemically nickel plated. Suggested matching hole in H7 tolerance."Push/Pull" knurled knob: High resilience polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other chemicals.
E+G GN 417 indexing plunger
E+G GN 417 indexing plunger
Elesa+Ganter GN 417 indexing plungerStandard versions available:- Version A: With lifting ring- Version B: With KnobFor materials and further information please see datasheet.
E+G GN 413 indexing plunger
E+G GN 413 indexing plunger
Elesa+Ganter GN 413 indexing plungerOwing to its shape, the lifting ring of the indexing plungers GN 413 can be used both as a screw-in assist during assembly or as indexing lock (Type C).Indexing plungers with rest position are used when the indexing pin is temporarily not allowed to protrude. After the pin is pulled in, turn the pull ring by 90°. The ring is held in position by an indexing notch.Threaded body: Black-oxide steel.Plunger: AISI 303 Stainless steel, chemically nickel-plated. Sugg ....
E+G GN 413-NI indexing plunger
E+G GN 413-NI indexing plunger
Elesa+Ganter GN 413-NI indexing plunger in stainless steel.Owing to its shape, the lifting ring of the indexing plungers GN 413 can be used both as a screw-in assist during assembly or as indexing lock (Type C)Indexing plungers with rest position are used when the indexing pin is temporarily not allowed to protrude. After the pin is pulled in, turn the pull ring by 90°. The ring is held in position by an indexing notch.Threaded body: AISI 303 Stainless steelPlunger: AISI 303 Stainless steel, ch ....
E+G GN 416 indexing plunger
E+G GN 416 indexing plunger
Elesa+Ganter GN 416 indexing plungerHousing: Zinc die casting, plastic coated, RAL 9005, textured finish. Plunger: Zinc-plated steel, blue passivated. Spring: AISI 301 Stainless Steel. Latch lever: Black Plastic Technopolymer (Polyamide PA)Standard versions available: - Type S: without locking, without rest position. - Type L1: Locking / Rest Position via counterclockwise rotation. - Type R1: Locking / Rest Position via clockwise rotation.
E+G GN 817 indexing plunger
E+G GN 817 indexing plunger
Elesa+Ganter GN 817 indexing plungerOoffer the following advantages:- two retracting strokes (l1) per plunger ø;- defined thread length by an undercut at the end of the thread.For material quality please see data sheet under Documents.
E+G GN 817.8 indexing plunger
E+G GN 817.8 indexing plunger
Elesa+Ganter GN 817.8 indexing plungerStandard versions - Type B: without rest position, without locknut. - Type C: with rest position, without lock nut.Threaded Body: Steel ST blackened. Plunger: Stainless Steel AISI 303. Knob: Black Plastic (Polyamide PA).
E+G GN 817.3 indexing plunger
E+G GN 817.3 indexing plunger
Elesa+Ganter GN 817.3 Indexing plungerDeveloped to enable precise locating when guide bushes DIN 172 or DIN 179 are used. For this purpose as a rule, as a plain guide bush (Type A), is used whereby the dimension l3 of the plunger determines the length of the bush.The precise location is, therefore, not dependent on the guide pin in the plunger, but on the accuracy of the guide bush (bore tolerance G6) and the plunger (tolerance h7). Both components are hardened and ground. It goes without saying ....
E+G GN 607.4 indexing plunger
E+G GN 607.4 indexing plunger
Elesa+Ganter GN 607.4 Indexing plungerDesigned for welded fixing, in particular for use in steel square tubings.The lug d2 is intended for positioning.The plastic knob with the in-moulded indexing pin is driven on after the welding process.Body: Black-oxide steel.Plunger: Black-oxide steel, hardened. Suggested matching hole with tolerance +0.3 / +0.25.Knob: Plastic, polyamide based (PA) technopolymer, black colour, matte finish, not removable.
E+G GN 822.6 B indexing plunger
E+G GN 822.6 B indexing plunger
Elesa+Ganter GN 822.6 B Mini indexing plunger without rest positionTo mount, first turn the mini indexing plunger in with the knurled button.Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner. They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.Type B: Without rest pos ....
E+G GN 822.7 B indexing plunger
E+G GN 822.7 B indexing plunger
Elesa+Ganter GN 822.7 B Mini indexing plunger without rest positionDistinguished for their small dimensions. Based on the principle of the GN 822 mini indexing plungers, this model combines their clever type of construction with acomplete series of all current sizes of bolts and threads. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.They are inserted into positi ....
E + G GN 822.8 indexing plunger
E + G GN 822.8 indexing plunger
Elesa+Ganter GN 822.8 B Mini indexing plunger without rest position.Are distinguished for their small dimensions. They are mounted by countersunk screws.Versions B: Without rest positionAlso available as C: With rest position - please see this.For information regarding materials please see datasheet under Documents.
E+G GN 817 - NI Indexing plunger
E+G GN 817 - NI Indexing plunger
E+G GN 717 A/B Indexing plunger
E+G GN 717 A/B Indexing plunger
Elesa+Ganter GN 717 B and BK indexing plunger with knob and rest position.GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.Versions:- B without rest position (Knob), without lock nut- BK without rest position (Knob), with lock ....
E+G GN 712 Indexing plunger
E+G GN 712 Indexing plunger
Elesa+Ganter GN 712 Cam action indexing plungerUsed in such applications where the plunger must not protrude continually. When turning the cam by 90° resp. 120° in anti-clockwise direction, the plunger is moved through a curved opening in the body. After that, the plunger is retracted.
E+G GN 7017 Indexing plungers
E+G GN 7017 Indexing plungers
E+G GN 7017 are activated through a lever and are characterized by small dimensions.These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.Available in 4 types:- Type B: without rest position, without locknut- Type BK: without rest position, with locknut- Type C: with rest position, witho ....
E+G GN 822.9 B/BN indexing plunger
E+G GN 822.9 B/BN indexing plunger
Elesa+Ganter GN 822.9 is a series of mini indexing plungers in stainless steel, which differ from other indexing plungers when it comes to smaller dimensions.Types:- Type B: without restposition, with plastic knob- Type BN: without restposition, with stainless Steel knobMaterial:Guide in Stainless Steel AISI 304Pin in Stainless Steel AISI 303Spring in Stainless Steel AISI 301Version with plastic knob (type B):Knob in matte, black plastic (Polyamide PA) - not removableVersion with Stainless Steel ....
E+G GN 721 Indexing plunger
E+G GN 721 Indexing plunger
E+G GN 721 indexing plungerFor GN 721 cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock. 
E+G GN 817.5 Indexing plunger
E+G GN 817.5 Indexing plunger
E+G GN 721.5 Indexing plunger
E+G GN 721.5 Indexing plunger
Elesa+Ganter GN 721.5 lever indexing plunger in Stainless steel AISI 303.Used when the plunger must be retracted quickly. By rotating the lifting lever by 180°, the plunger stops in the retracted position. The lever is kept in this position by a notch.Available in different types:Type RA: Right-hand lockType RB: Right-hand lock, with plastic coverType RAK: Right-hand lock, with lock nutType RBK: Right-hand lock, with plastic cover, with lock nutType LA: Left-hand lockType LB: Left-hand l ....
E+G GN 722.4 indexing plunger
E+G GN 722.4 indexing plunger
Elesa+Ganter 722.4 indexing plunger.With indexing plungers GN 722.4, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ST version is designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments. The dimensional tolerances between plunger pin and guide are selected so that the functional reliability is guaranteed even aft ....
E+G GN 722.5 indexing plunger
E+G GN 722.5 indexing plunger
Elesa+Ganter GN 722.5 indexing plunger for surface mounting.With indexing plungers GN 722.5, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ZB and SW versions are designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments. The dimensional tolerances between plunger pin and guide are selected so that the functional r ....
E+G GN 722.6 indexing plunger
E+G GN 722.6 indexing plunger
Elesa+Ganter GN 722.6 positioneringsbolt with flange for surface mounting.With indexing plungers GN 722.6, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ZB and SW versions are designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments.The dimensional tolerances between plunger pin and guide are selected so that the ....
E+G GN 814 indexing plunger lockable
E+G GN 814 indexing plunger lockable
Elesa+Ganter GN 814 stainless steel indexing plungers, lockableLockable Stainless Steel-Indexing plungers GN 814 are used for applications where unauthorized operation is to be prevented. Types A and AK secure the plunger pin in the front position after locking. Types E and EK additionally secure the plunger pin in the rear position if it is not to protrude temporarily. The key can be removed in the end positions.Locks with coding SC are keyed alike, allowing each lock to be operated with the sa ....
E+G GN 822 indexing plunger
E+G GN 822 indexing plunger