Rubber and Plastics

E+G Oil coolant pipe

Elesa+Ganter modular systems for lubrication are composed of a series of segments to suit the required purpose and to realise the desired length. Segments can be combined with threaded fittings, connectors, adapters and nozzles.
Flexible coolant pipes can be used in applications when lubrication, precise suction of fluids or dust particles are required, or when a certain temperature should be maintained.
The components of the coolant hose are in acetal resin based technopolymer in blue and orange standard colours.

E+G FH. 1/4 Modular lubrication system

Elesa+Ganter FH. 1/4" modular system for lubrication.The modular structure, made using snap assembly of the single elements, allows you to adjust and direct the lubricating jet with maximum flexibility, while maintaining stability in operation even in the presence of vibrations. The length of the tube can be adapted to the specific application by adding or removing the appropriate number of elements via the snap fitting. The use of PTFE tape on the threading of the fittings is recommended to f ....

E+G FH. 1/2 Modular lubrication system

Elesa+Ganter FH. 1/2" kit with tubes for modular system for lubrication.The modular structure, made using snap assembly of the single elements, allows you to adjust and direct the lubricating jet with maximum flexibility, while maintaining stability in operation even in the presence of vibrations. The length of the tube can be adapted to the specific application by adding or removing the appropriate number of elements via the snap fitting. The use of PTFE tape on the threading of the fittings ....

E+G FHT Modular tubes

Elesa+Ganter FHT modular tubes with modular structure formed by means of the snap mounting of the individual elements (Fig.1), allows the lubricating jet to be channelled in the desired direction.The length of the tube can be adapted to the specific application by adding or removing the appropriate number of elements via the snap fitting.To form a complete modular system, coupling with a nozzle FHN, and a fitting is required FHJ(Fig.2).Assembled without using seals, the system should therefore n ....

E+G FHT-C Tubes wound along a reel

E+G FHT-C Tubes for modular systems for lubrication, technopolymerElesa+Ganter FHT-C modular tubes with modular structure formed by means of the snap mounting of the individual elements (Fig.1), allows the lubricating jet to be channelled in the desired direction.The length of the tube can be adapted to the specific application by adding or removing the appropriate number of elements via the snap fitting.To form a complete modular system, coupling with a nozzle FHN, and a fitting is required FHJ ....

E+G FHJ Threaded fittings

Elesa+Ganter FHJ threaded fittings for modular systems for lubrication.Fitting to be implemented by means of snap coupling (Fig.1) with modular tubes FHT. The use of PTFE tape on the threading is recommended to facilitate sealing.Material:Acetal-based technopolymer (POM).Standard executions:FHJ: BSPT conical threading, blue.FHJ-NPT: NPT conical threading, orange.Special executions on request:- Threaded fittings made from raw materials suitable for contact with food (FDA CFR.21 and EU 10/2011).- ....

E+G FHV Ball valve

Elesa+Ganter FHV ball valve for modular systems for lubrication.FHV ball valve is needed when the flow needs to be separated or interrupted within the system.Fitting to be implemented by means of snap coupling with modular tubes FHT.Material:Acetal-based technopolymer (POM), blue and orange.Special execution on request:Valve made from raw materials suitable for contact with food (FDA CFR.21 and EU 10/2011).

E+G FHN Nozzles

Elesa+Ganter FHN nozzles for modular systems for lubrication.The use of nozzles allows the lubricating spray to be adjusted, concentrating it or distributing it on the surface concerned. Fitting to be implemented by means of snap coupling with modular tubes FHT.Material:Acetal-based technopolymer (POM), orange.Standard executions:FHN: nozzle with a single hole.FHN-P: nozzle with a hole with a rectangular section.FHN-F: nozzle with a joint head with sixteen holes.Material resistant to detergents, ....

E+G FHS Sockets

Elesa+Ganter FHS Sockets for modular systems for lubrication.Recommended for equipping a lubrication system with a threaded fitting both at the inlet and outlet of the modular tube.Fitting to be implemented by means of snap coupling (Fig.1) with modular tubes FHT. Material:Acetal-based technopolymer (POM), orange.Material resistant to detergents, lubricants and oils, avoid contact with strong acids and bases. To use fluids other than those listed, please contact us. In any case we suggest to ve ....

E+G FHB Magnetic stand

Elesa+Ganter FHB magnetic stand allows you to use up to two 1/4" segments simultaneously; the magnet integrated in the structure allows the system to be anchored in multiple positions, also facilitating repeated movements. Fluid can enter the system via the hose fitting to be coupled with an external tube, for a better seal, the use of tightening bands is recommended. The magnetic stand can also be used with 1/2" systems by means of a threaded adapter which can be purchased.Material resistant to ....

E+G FHF Y-fittings

Elesa+Ganter FHF Y-fittings for flexible coolant hoses. Recommended for equipping a system for the lubrication of two different flows at the outlet, keeping only one at the inlet.Fitting to be implemented by means of snap coupling (Fig.1) with modular tubes .Material:Acetal-based technopolymer (POM), orange.Material resistant to detergents, lubricants and oils, avoid contact with strong acids and bases. To use fluids other than those listed, please contact us. In any case we suggest to verify th ....