E+G GN 7607 Wipers (Hygienic Design series)

When used in hygienic areas, wipers GN 7607 can be used to seal axially or radially moving components with a cylindrical cross-section against their bearing position. With their specially
shaped sealing lip, the wipers prevent the formation of dead spaces where dust can accumulate. Commercially available wipers are not suitable for this purpose due to a 45° chamfer on the inner edge of the sealing lip.

All standard parts equipped and delivered with wipers GN 7607 are listed in the table. For replacement, the corresponding wipers can be ordered individually. As delivered, or unassembled, the wipers have the “actual dimensions” as stated in the table. To guarantee a secure fit and a reliable seal, the specified installation space must be provided at the bearing position. This ensures that the wiper undergoes the necessary deformation during installation. All surfaces in contact with the wiper should have a minimum surface quality of Ra 0.8 μm.

Specifications:
Made from thermoplastic polyurethane TPU
– Blue
– Temperature resistant -20 °C to +110 °C
– FDA compliant
– Hardness 95 ±5 Shore A 95

Suitable for:
E+G GN 20 Levelling foot
E+G GN  1150 FH Hygienic lock
E+G GN 1150 VH Hygienic lock

GN 7607 Datasheet

Tolerances

Elastomer charateristics